RUST-RESISTANT READY TO RESPOND.

The Wetside Tanker is built with a classic square tank with 1,250 to 4,000 gallon capacity and offers industry-leading versatility, with options for large hose beds, additional compartment space and the ability to be a pumper tanker.

The walls of the poly tank are 3/4” with no additional outer layer, making this apparatus lighter than most in the industry. Because the tank is lighter, there is more available weight for water and equipment. In addition, the tank comes with a lifetime warranty and will be corrosion and maintenance free for the entire life of your apparatus.

An industry leading, overflow vent and containment baffle configurations to provide superior strength – exceeding NFPA and DOT requirements. This series also offers enhanced vehicle stability to improve safety and efficiencies.

At a Glance

  • Custom or commercial chassis
  • Optional 3-way dump system to ensure use of all water
  • Hale, Darley, or Waterous pump
  • Roll up or box and pan doors
  • Adjustable and slide-out trays
  • Custom, flexible storage solutions
  • Custom-built porta-tank, static ladder, electric, or hydraulic racks
  • Superior dump and fill performance
  • Spartan

Tank Capacity

1250 to 4000 US gal

Pump GPM

up to 2500 GPM

Pump Options

front, top, side, underbody

Safety Innovations

Spartan Advanced Protection System

The Spartan Advanced Protection System® (APS) is a set of features designed to keep firefighters.  This market-leading system includes:

Frontal Airbags
In the event of a frontal collision,  knee and steering wheel airbags deploy and protect against injuries resulting from hitting the instrument panel or other interior points of contact. The lower body is locked in place so the upper body can be slowed and protected by the steering wheel airbag.

Side Roll Airbags
When an unrecoverable rollover is detected, side airbags deploy and protects all occupants from rollovers with the most advanced side roll airbag protection system.

Advanced Seatbelts
Innovative seat belt systems pulls the occupant into the seat in the event of an impact or rollover using a pretensioner system that dramatically reduces restraint system injuries.

driver-knee-airbags

Eight Air Bag Positions

Eight airbag positions, the most offered by any manufacturer, including knee and side curtain airbags. These give your apparatus the highest available impact and anti-ejection protection on the market.

Side impact protection:

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags:

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags:

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Industry-First Outboard Sensors

State-of-the-art outboard sensors protect occupants from multi-angle impacts in the cab. These sensors are mounted at the outer perimeter of the cab providing a “zone of safety” inside the cab. Each sensor communicates back to the restraint control module that monitors which airbag should deploy and under what conditions.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Cab Construction

Spartan offers flat, 5″, 10″, 20″, and 24″ raised roof options that are reinforced with C-channel supports. As well as multiple seating configurations to provide your crew with extended legroom, improved visibility, additional storage and provides extra safety from triple-reinforced box front bulkhead, engine compartment, front and rear step assemblies.

Features

Durable Framework

All tankers are built with our exclusive Tor-Max and Tri-Max body structure delivering extra compartment space, reduced torsional resistance and improved structural stability.

1 of 8
pumper tri-max body construction 3d model

Tor-Max® & Tri-Max® Body Construction

Delivers extra compartment space, reduces torsional resistance and improves structural stability.

2 of 8
fire truck body mounting hardware

Vibra Torq Body-Mount System

Reduces vibration and stresses on the body for a smoother ride, requires less maintenance, and leads to longer vehicle life.

3 of 8

Dump Options

Move water at remarkable speed from main tank to dump tank, 3,000-gallons in less than two minutes. Side and rear dump chutes available in manual, electric, or air operated.

4 of 8

Storage Options

Custom porta-tank, static ladder, electric, or hydraulic racks.

5 of 8

User-Friendly Pump Panels

Custom-designed pump panels are easy to use for simplified operation.

6 of 8

Convenient Storage

Spacious compartments conveniently located on the back and the side of the tanker provide ample room for storing gear.

7 of 8

Dual Venting

Dual overflows provide extra venting for both faster fill and dump rates, plus they minimize the possibility of damaging the tank during fill operations.

8 of 8