105’ Rear Mount Ladder

Maximize Your Reach.

The 105’ Rear Mount Ladder, available on a single or tandem axle, is designed to be the centerpiece of your aerial attack and rescue operations. Built with 100,000 psi yield strength steel, this aerial workhorse provides up to 750 lb. tip load rating (wet), the ability to flow 1,500 GPM at 0 degrees elevation straight out to the side, and the solid “step feel” that all Spartan Aerials are known for.

All configurations are designed with exceptional compartment storage with a short wheelbase for better maneuverability. The 105’ Rear Mount Ladder on a single axle is available in two configurations that offer a 500 or 750 lb. tip load.

Safety Innovations

Spartan Advanced Protection System

The Spartan Advanced Protection System® (APS) is a set of features designed to keep firefighters. This market-leading system includes:

Frontal Airbags
In the event of a frontal collision, knee and steering wheel airbags deploy and protect against injuries resulting from hitting the instrument panel or other interior points of contact. The lower body is locked in place so the upper body can be slowed and protected by the steering wheel airbag.

Side Roll Airbags
When an unrecoverable rollover is detected, side airbags deploy and protects all occupants from rollovers with the most advanced side roll airbag protection system.

Advanced Seatbelts
Innovative seat belt systems pulls the occupant into the seat in the event of an impact or rollover using a pretensioner system that dramatically reduces restraint system injuries.

Eight Air Bag Positions

Eight airbag positions, the most offered by any manufacturer, including knee and side curtain airbags. These give your apparatus the highest available impact and anti-ejection protection on the market.

Side impact protection:

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags:

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags:

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Side Impact Protection

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Galvanized Frame Rails

Provides decades of corrosion protection through hot-dip galvanizing, one of the most maintenance-free and economical corrosion-protection systems available. Particularly beneficial for trucks in Northern climates that are regularly exposed to snow/ice melt chemicals.

Cab Strength

Accidents are simulated in which the cab is subjected to rigorous tests designed to simulate realistic driving conditions as closely as possible to monitor safety.

Features

FP-4 Stabilizing System

Our unique stabilizing system places the front stabilizers just behind the cab of the apparatus. This forward placement provides superior fore/aft leveling capability on steep terrain, plus easy access to the pump panel, while reducing stress on the chassis.

1 of 8

Electronic Positional Waterway

Never climb another ladder just to re-position the master stream. Our patented electric positional waterway lets the operator position the waterway to either Rescue or Water Tower mode with a simple one-step procedure from the turntable.

2 of 8

CP-84 Chrome Plated Waterway

The strongest, most durable waterway in the industry featuring a galvanized inner coating prevents corrosion of the 84,000 psi pipe. The exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder.

3 of 8

QL-12 Electrical System

Our reliable plug-and play system reduces the amount of non-plug connectors and makes it easy to add components and make repairs to the electrical system.

4 of 8

Removable Egress

Bolt-on removable egress for easy replacement. Available in two lengths.

5 of 8

Ergonomic Hose Load (EHL)

Our patented, heavy-duty hydraulic hose loader option improves firefighter safety by placing a maximum of 1,000 feet of 5″ LDH within a firefighter’s reach, eliminating climbs on a wet or slippery apparatus to reload hose.

6 of 8

AL-11 Aerial Logic

A totally integrated system that provides instant feedback on a ladder’s extension, location, retraction, angle, load and breathing air system status, as well as J1939 engine information.

7 of 8

Joystick Controls

Electric-over-hydraulic joystick controls (optional) are a light touch for precision control.

8 of 8