100’ Rear Mount Ladder

LOW TRAVEL HEIGHT. MAXIMUM REACH.

For many departments, the dimension that drives aerial apparatus selection is the overall height. This 100′ rear mount ladder design is based around our 105′ aerial structure; however, we have shaved off 5” of overall height thanks to lower aerial side rails. So you can fit it into your fire station and under all the bridges, overpasses and aqueducts that stand in the way of a quick response.

The 500 lb. tip load rating while flowing 1,250 GPM at zero degrees give you all the firefighting power you need. Available with or without a pump and tank, you have the configuration flexibility for your next rear mount ladder while keeping your maximum reach and performance.

Safety Innovations

Spartan Advanced Protection System

The Spartan Advanced Protection System® (APS) is a set of features designed to keep firefighters. This market-leading system includes:

Frontal Airbags
In the event of a frontal collision, knee and steering wheel airbags deploy and protect against injuries resulting from hitting the instrument panel or other interior points of contact. The lower body is locked in place so the upper body can be slowed and protected by the steering wheel airbag.

Side Roll Airbags
When an unrecoverable rollover is detected, side airbags deploy and protects all occupants from rollovers with the most advanced side roll airbag protection system.

Advanced Seatbelts
Innovative seat belt systems pulls the occupant into the seat in the event of an impact or rollover using a pretensioner system that dramatically reduces restraint system injuries.

Eight Air Bag Positions

Eight airbag positions, the most offered by any manufacturer, including knee and side curtain airbags. These give your apparatus the highest available impact and anti-ejection protection on the market.

Side impact protection:

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags:

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags:

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Industry-First Outboard Sensors

State-of-the-art outboard sensors protect occupants from multi-angle impacts in the cab. These sensors are mounted at the outer perimeter of the cab providing a “zone of safety” inside the cab. Each sensor communicates back to the restraint control module that monitors which airbag should deploy and under what conditions.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Cab Construction

Spartan offers flat, 5″, 10″, 20″, and 24″ raised roof options that are reinforced with C-channel supports. As well as multiple seating configurations to provide your crew with extended legroom, improved visibility, additional storage and provides extra safety from triple-reinforced box front bulkhead, engine compartment, front and rear step assemblies.

Features

FP-4 Stabilizing System

Our unique stabilizing system places the front stabilizers just behind the cab of the apparatus. This forward placement provides superior fore/aft leveling capability on steep terrain, plus easy access to the pump panel, while reducing stress on the chassis.

1 of 9

Electronic Positional Waterway

Never climb another ladder just to re-position the master stream. Our patented electric positional waterway lets the operator position the waterway to either Rescue or Water Tower mode with a simple one-step procedure from the turntable.

2 of 9

CP-84 Chrome Plated Waterway

The strongest, most durable waterway in the industry featuring a galvanized inner coating prevents corrosion of the 84,000 psi pipe. The exterior waterway is chrome plated to provide a smooth telescopic movement throughout the entire extension and retraction of the aerial ladder.

3 of 9

QL-12 Electrical System

Our reliable plug-and play system reduces the amount of non-plug connectors and makes it easy to add components and make repairs to the electrical system.

4 of 9

Removable Egress

Bolt-on removable egress for easy replacement. Available in two lengths.

5 of 9

AL-11 Aerial Logic

A totally integrated system that provides instant feedback on a ladder’s extension, location, retraction, angle, load and breathing air system status, as well as J1939 engine information.

6 of 9

Joystick Controls

Electric-over-hydraulic joystick controls (optional) are a light touch for precision control.

7 of 9

Ergonomic Hose Load (EHL)

Our patented, heavy-duty hydraulic hose loader option improves firefighter safety by placing a maximum of 1,000 feet of 5″ LDH within a firefighter’s reach, eliminating climbs on a wet or slippery apparatus to reload hose.

8 of 9

LED Rung Lights

Smeal offers blue rung lighting for superior visibility in the aerial climbing area.

9 of 9